2.3.3.2.22. NXtofsingle¶
Status:
application definition, extends NXobject
Description:
This is a application definition for raw data from a generic TOF instrument
Symbols:
The symbol(s) listed here will be used below to coordinate datasets with the same shape.
xSize: xSize description
ySize: ySize description
nDet: Number of detectors
nTimeChan: nTimeChan description
- Groups cited:
NXdata, NXdetector, NXentry, NXinstrument, NXmonitor, NXsample, NXuser
Structure:
entry: (required) NXentry
start_time: (required) NX_DATE_TIME ⤆
definition: (required) NX_CHAR ⤆
Official NeXus NXDL schema to which this file conforms ...
Official NeXus NXDL schema to which this file conforms
Obligatory value:
NXtofsingle
duration: (required) NX_FLOAT
pre_sample_flightpath: (required) NX_FLOAT {units=NX_LENGTH} ⤆
This is the flight path before the sample position. This can be determined b ...
This is the flight path before the sample position. This can be determined by a chopper, by the moderator or the source itself. In other words: it the distance to the component which gives the T0 signal to the detector electronics. If another component in the NXinstrument hierarchy provides this information, this should be a link.
INSTRUMENT: (required) NXinstrument ⤆
detector: (required) NXdetector ⤆
data: (required) NX_INT (Rank: 3, Dimensions: [xSize, ySize, nTimeChan])
distance: (required) NX_FLOAT (Rank: 1, Dimensions: [1]) {units=NX_LENGTH} ⤆
Distance to sample for the center of the detector
time_of_flight: (required) NX_FLOAT (Rank: 1, Dimensions: [nTimeChan]) {units=NX_TIME_OF_FLIGHT} ⤆
polar_angle: (required) NX_FLOAT (Rank: 1, Dimensions: [nDet]) {units=NX_ANGLE} ⤆
polar angle for each detector element
azimuthal_angle: (required) NX_FLOAT (Rank: 1, Dimensions: [nDet]) {units=NX_ANGLE} ⤆
azimuthal angle for each detector element
MONITOR: (required) NXmonitor ⤆
Count to a preset value based on either clock time (timer) ...
Count to a preset value based on either clock time (timer) or received monitor counts (monitor).
Any of these values:
monitor
|timer
preset: (required) NX_FLOAT
preset value for time or monitor
distance: (required) NX_FLOAT {units=NX_LENGTH} ⤆
data: (required) NX_INT (Rank: 1, Dimensions: [nTimeChan])
time_of_flight: (required) NX_FLOAT (Rank: 1, Dimensions: [nTimeChan]) {units=NX_TIME_OF_FLIGHT} ⤆
Hypertext Anchors¶
List of hypertext anchors for all groups, fields, attributes, and links defined in this class.